Netizen Robotics

Products Docs About Us Contact Us

Products Docs About Us Contact Us

Accredited by MDEC

© 2026 Netizen Robotics. All rights reserved.

Getting started

OverviewBuild, Connect, and Program Auron

Assembly guide

StartBefore You Start Assembly Step 1Base Preparation Step 2Wheel Assembly Step 3LiDAR Mount Step 4Back Panel Installation Step 5Screen Assembly Step 6Main Board Integration Step 7Body Enclosure Core finalFinal Top Assembly Vision finalFinal Top Assembly with Vision

Software setup

Wi-Fi setupConnect the Robot to Wi-Fi DashboardPair the Robot with the Dashboard JupyterLabOpen JupyterLab on the Robot

Assembly guideStep 1: Base Preparation

Getting started

OverviewBuild, Connect, and Program Auron

Assembly guide

StartBefore You Start Assembly Step 1Base Preparation Step 2Wheel Assembly Step 3LiDAR Mount Step 4Back Panel Installation Step 5Screen Assembly Step 6Main Board Integration Step 7Body Enclosure Core finalFinal Top Assembly Vision finalFinal Top Assembly with Vision

Software setup

Wi-Fi setupConnect the Robot to Wi-Fi DashboardPair the Robot with the Dashboard JupyterLabOpen JupyterLab on the Robot

Step 1: Base Preparation

Install the base nuts and brass spacers.

AssemblyStep 16 minUpdated 2026-03-18

Assembly

Walkthrough

Auron assembly: Install the M3 nuts on the base plate. — Install the M3 nuts on the base plate.

Assembly progress2 / 10

Start 1 2 3 4 5 6 7 Core final Vision final

On This Page